A step-by-step blog covering the creation of a quadcopter prototype and then converting that into a heavy frame hexacopter or octocopter to create an RC aerial photography platform.
Tuesday, March 20, 2012
Moving again
I got started again. Used a multimeter and determined that it is, indeed, a bad connection in the power distribution wires.
I'll work on that Wednesday night and do some more troubleshooting.
Excellent! Glad you're back on track. I've been following your progress and am at roughly the same stage, just waiting for pay day and a frame from Rusty. Good luck!
Good luck with the project. I've been researching building a quadcopter for a few days specifically for Burning Man, and thought I'd see if anyone was doing it. Seems so :) Attaching my 7d seems to risky and heavy but a GoPro or smaller cam seems more feasible. Anyways... I look forward to seeing how this comes along. Good luck.
Also, if you need any pieces laser cut, I've been playing with laser cutting at SF techshop. It's amazing what you can make with that thing. COuld come in handy. Cheers.
Excellent! Glad you're back on track. I've been following your progress and am at roughly the same stage, just waiting for pay day and a frame from Rusty.
ReplyDeleteGood luck!
Good luck with the project. I've been researching building a quadcopter for a few days specifically for Burning Man, and thought I'd see if anyone was doing it. Seems so :) Attaching my 7d seems to risky and heavy but a GoPro or smaller cam seems more feasible. Anyways... I look forward to seeing how this comes along. Good luck.
ReplyDeleteAlso, if you need any pieces laser cut, I've been playing with laser cutting at SF techshop. It's amazing what you can make with that thing. COuld come in handy. Cheers.
Where did you go?
ReplyDelete